 |
|
| Pro
Series 600 Imager |
|
|
|
The
Pro Series 600 Imager can produce up to 600x600
dpi at speeds over 30,000/hr. Each imager has
1.5 x 17" print area. Maximum print area
is six inches with additional imagers (4 heads
mounted together). Utilizes HP technology for
highest-quality images in true type fonts, BMP
logos, and Scitex files. Bulk-ink supply (400cc)
is available for high production. |
|
|
|
|
 |
|
| Pro
Series 600 Dryer |
|
|
|
The
Speed-Dri Drying System by Research Inc., is an
essential device when working with coated stock
and higher-quality ink jetting. The Pro Series
600 Dryer has a typical drying area of 3"
x 16" with a temperature range of 0-600 degrees
with infrared technology. |
|
|
|
|
 |
|
| Pro
Series 600 Tabber |
|
|
|
The
Profold Tabber by Profold, Inc. is a high-production
compact tabber for multiple shift operations.
It is specifically designed for use with the Pro
Series 600. The high output speed will allow one
or two tabs to be applied at 30,000 pieces per
hour. Applies USPS approved automated sizes and
pressure sensitive stamps. Can be placed in-line
with your ink-jet base or off-line with high speed
feeders. |
|
|
|
|
 |
|
| Pro
Series 600 Conveyor |
|
|
|
The
Pro Series 600 Conveyor is available in a wide
variety of sizes. The lengths include 6', 12',
up to 18'. The conveyors have a built-in DC controller
for 115 operation and variable speed for side
feed capability. Other voltages are available. |
|
|
|
|
 |
|
| Feeder |
|
|
|
The
"IJ" Series Continuous Feed models utilize
dynamic rotation technology. This provides accurate
paper separation every time and there is never
a need to rotate retard bands. Pro Series 600
Feeder can be removed from the Ink Jet base and
mounted on a stand to feed other host machines
such as an In-line Tabber. |
|
|
|
|
 |
|
| Vacuum
Base |
|
|
|
The
Pro Series 600 Vacuum Base provides a 16"
wide x 6' foot long area with allows the allocation
of up to 4 imagers. The sequential start/stop
feature allows control of all units attached,
and also the movement of the product. With this
feature, there would not be any product left under
the imagers or heater when the unit is stopped
and no product is lost when the unit is started.
|
|
|
|
|